Aanalog MUX
Number of Channels: 1 Channel
Configuration: 1 x 16:1
Minimum Dual Supply Voltage: +/- 15 V
Maximum Dual Supply Voltage: +/- 15 V
On Resistance - Max: 1.8 kOhms
On Time - Max: 300 ns
Off Time - Max: 300 ns
Minimum Operating Temperature: 0 C
Maximum Operating Temperature: + 75 C
100V/2A Peak, Low Cost, High Frequency Half Bridge Driver
- Bootstrap Supply Max Voltage to 114VDC
- On-Chip 1? Bootstrap Diode
- Fast Propagation Times for Multi-MHz Circuits
- Drives 1000pF Load with Rise and Fall Times Typ. 10ns
- CMOS Input Thresholds for Improved Noise Immunity
- Independent Inputs for Non-Half Bridge Topologies
- No Start-Up Problems
- Outputs Unaffected by Supply Glitches, HS Ringing Below Ground, or HS Slewing at High dv/dt
- Low Power Consumption
- Wide Supply Range
- Supply Undervoltage Protection
Datenblatt:
HIP2100.pdf
100V/2A Peak, Low Cost, High Frequency Half Bridge Driver
Number of Drivers: 2 Driver
Number of Outputs: 2 Output
Output Current: 2 A
Supply Voltage - Min: 9 V
Supply Voltage - Max: 14 V
Configuration: High Side, Low Side
Rise Time: 500 ns
Fall Time: 500 ns
Minimum Operating Temperature: - 40 C
Maximum Operating Temperature: + 125 C
Datenblatt:
HIP2100.pdf
80V/2.5A Peak, High Frequency Full Bridge FET Driver
- Drives N-Channel FET Full Bridge Including High Side Chop Capability
- Bootstrap Supply Max Voltage to 95VDC
- Drives 1000pF Load at 1MHz in Free Air at +50°C with Rise and Fall Times of Typically 10ns
- User-Programmable Dead Time
- Charge-Pump and Bootstrap Maintain Upper Bias Supplies
- DIS (Disable) Pin Pulls Gates Low
- Input Logic Thresholds Compatible with 5V to 15V Logic Levels
- Very Low Power Consumption
Datenblatt:
HIP4080A.pdf